How to use
A fresh rinse, whenever you need it. aéneti is designed to make intimate care feel simple. Fill, rinse and pat dry for a fresh, comfortable feeling.
Remove the silicone cap and twist to detach the reservoir from the unit. Fill the reservoir with clean water, then reattach it securely.
Good to know: You can also attach the unit directly to a standard water bottle when you're not near a sink. Just screw the unit onto the opening of the bottle!
Open the nozzle and position the bidet where you’d like to rinse.
Press, rinse, refresh
- Press the button once for the standard spray.
- Press twice for a deeper-pressure rinse.
- Press three times for pulsing action.
- Press four times to turn the spray off.
Take a moment to rinse, then gently pat dry with toilet paper or a soft cloth.
Caring for your aéneti bidet
Charging & Battery
Charge aéneti using the supplied USB-C cable.
A red light means the battery is low. A green light means your bidet is fully charged.
Please note: The battery is built into the unit and is not designed to be removed or replaced by the user.
Keep the charging port dry. Do not charge aeneti if the unit, cable or charging port is wet or damaged.
Cleaning Care
The nozzle can be rinsed with clean water to keep it fresh between uses.
Wipe down the unit and reservoir with an alcohol wipe to help prevent mould and keep your aéneti hygienic.
Do not submerge the electronic unit in water. Avoid bleach, abrasive cleaners and other harsh cleaning products.
Optimal Storage
After use, empty any remaining water from the reservoir.
Allow all parts to completely dry before storing.
This helps prevent moisture from sitting inside the product between uses.
Hot tip: Detach the unit from the reservoir, then turn bidet on to spray out any remaining water from the nozzle. This helps prevent leaks while stored.